ABB Home and Building Automation - ClimaECO

Tagged entries

ClimaECO

Add Search Word

Page 2 out of 6 Pages

FCC/S 1.x.x.1: Why does the fan directly switch into the speed level depending on the control value if the fan mode is set to “step”?
(15003 views)
FCC/S 1.x.x.1: What is the summer compensation used for?
(14530 views)
FCC/S 1.x.x.1: How is the temperature limitation realized?
(13909 views)
FCC/S 1.x.x.1: Is it possible to use the same physical device input for several activated temperature limitations?
(14399 views)
FCC/S 1.x.x.1: What should be considered if weighting of internal and external measurement is set to 0%?
(14510 views)
FCC/S 1.x.x.1: Although the operation is enabled the fan stages in dependence of the control value do not switch. Why?
(24135 views)
FCC/S 1.x.x.1: There are no changes via i-bus tool possible. Config mode can´t be enabled. Why?
(13942 views)
What is the difference between an electric heater and an electric heater in the fan coil unit in the application parameters of FCC/S 1.x.x1?
(14543 views)
FCC/S 1.x.x.1: What´s the purpose of the parameter “Send inactive control values cyclically”?
(13699 views)
FCC/S 1.x.x.1: Why is the control value 0% if basic load is active?
(13409 views)

[ previous ] [ next ]