Open questions
Here you can see questions asked by other users. If you answer these question, your answers may be inserted into the FAQ.
| Date / User | Question | |
|---|---|---|
| 06.03.2020 21:41 Ilya | Visualisation, Display and Signalling: I have Control Touch, I can control Philips Hue lamps on ios. How can I turn on my lights from the knx switch? | Answer |
| 13.03.2020 11:54 Iman KHabbazi | Commissioning and Configuration: Hello, I have this setup, an 83300 Controller and 83320/2-5 video distributor. Two 6136/07 7" Touch Panels and a IP Gateway 83342. everything is working fine and I have sound and Video in all stations. but from one 6136/07 I can unlock the front door but from another i cannot open the door. I don't know why or how this can happen? can anybody help me | Answer |
| 02.04.2020 11:04 Jack van Driel | IP-Router and Interfaces: I am redeploying a IPS/S 2.1 and want to reset it to the factory defaults. How can I do this? (I tried the procedure from the IPS/S 3.1, but that does not seem to work on the 2.1) Thx! | Answer |
| 28.04.2020 15:04 Benny Clerix | Outputs: I'm using the ABB SAH/S24.16.7.1. When sending an 'Off' signal through a groupadress that includes several switches. The switches that where in 'On' state are going out butt the next time you need to send 2x toggle to put them on. | Answer |
| 29.04.2020 08:32 Tomasz | Automation, Logic and Time Control: ABA/S 1.2.1 - What can be the reason for a flashing ON-LED all the time?. It is possible to send the program to the ABA/S 1.2.1 but unit won't work. Factory reset does not help. | Answer |
| 13.05.2020 05:46 Spike-Shi | i-bus KNX: Is it possible to use I-bus Switch actuators to switch 220VDC lighting loads? Or what's the Max DC Voltage and Current for DC? We have a project that the power supply only provide 220V DC. | Answer |
| 29.05.2020 09:41 RK | Energy Management: can we connect QA/S4.64.1 remotely or through ABB cloud? or do we need to simply forward the HTTP(80) and HTTPS(8080) port in the customer's router. | Answer |
| 21.08.2020 11:00 Darius Petkus | Energy Management: It's possible to add Instantaneous Value in Reports? Type: QA/S3.64.1 Version: 2.7.3 | Answer |
| 24.09.2020 17:22 Sreejith NS Sivan | Commissioning and Configuration: When i trying to pair The control Touch app to network it showing ("Verification Code" Found on web interface of device) why ? how can solve this. | Answer |
| 10.01.2021 19:26 Demetris Sophos | i-bus KNX: I have a MT701 display in a project and it works ok with the devises installed (SA/Sx.x.2.1). I replaced one of the devises with a new SA/Sx.x.2.2 and the LCD dos not control it. is there something i can do or it's not compatible | Answer |
| 26.01.2021 09:25 Athanasios Papapostolou | free@home: free@home sonos compatibility what are sonos compatible devices? do you have a list? | Answer |
| 13.02.2021 08:43 Timo Honkanen | Commissioning and Configuration: Where can I find knxprod and/or vd files for ABB's products, I'm specifically searching one for 6770-500? | Answer |
| 18.06.2021 18:25 ATHANASIOS MPATZAKIS | Visualisation, Display and Signalling: Hi . I have control touch ABB 6136/APP-500 in my intallations , I can not create schedules in scene that were created in etc 5. | Answer |
| 25.11.2021 11:40 Mohammed | Commissioning and Configuration: how can i communicate fc/s 1.1 to abz application unit time by triton(5/10-f MF/RTR/IR ) to can control the AC (ON/OFF ,Temp. Control(heating and cooling) , fan control) from the keypad ?? | Answer |
| 16.12.2021 09:13 Mehdi Ansari | Commissioning and Configuration: What is the latest version of ABB freelance that is compatible for AC 800F, PM 802F, P 3BDH000002R1, DA 0612? I need to upgrade software to 5he latest version and need to know the compatibility for this CPU! kind regards | Answer |
| 02.02.2022 04:52 Alan Chan | Welcome IP: The IP Gateway Network Information's Connection Status shown as "disconnected". Therefore I can't pair new phone via the "welcome" app. How to make the connection status to "connected"? | Answer |
| 15.02.2022 19:59 Mariusz Murawski | System, Infrastructure and Interfacing: How can I increase range for SAP-S-2? | Answer |
| 15.02.2022 20:08 Mariusz Murawski | Lighting Control: How many Inputs in BI-M-4.0.1 I have to use for switch on/off light, dim up/down lights? Is possible to program one input for all this functions? | Answer |
| 14.03.2022 16:57 Mariusz Murawski | Lighting Control: Hi, I would like to use f@h dimm actuator 4 gang to control/dimming LED Low voltage lamps. Please let me know what brand/model you recommend for connections below: Inductive L-transformers with LED/low-voltage halogen lamp: 4 x 210 W/VA to 1 x 600 W/VA. Electronic C-transformers with LED/low-voltage halogen lamp: 4 x 210 W/VA to 1 x 600 W/VA. Electronic LC-transformers with LED/low-voltage halogen lamp: 4 x 80 W/VA to 1 x 200 W/VA. | Answer |
| 30.05.2022 07:15 Stop secure@home outdoor siren from giving acoustic feedback when arming/ disarming the alarm system | secure@home: Currently - for whatever reason - the outdoor siren integrated with the secure@home alarm system is giving acoustic feedback (loud beeping) when the alarm system is armed or disarmed. How can I stop this from happening? What configuration do I have to change to not announce me arming or forgetting to disarm the alarm system? | Answer |
| 05.07.2022 14:12 Yi Liu | IP-Router and Interfaces: IPR/S 3.1.1:Is there any way to activate the Telegram LED (The Telegram LED doesn't light up when the bus is connected!)? | Answer |
| 02.09.2022 21:12 Marek Daňo | IP-Router and Interfaces: Hello, how can I reset the IPS/S 3.1.1 to factory settings. I tried the steps for IPR/S 3.5.1 reset but that didn't helped. I tried to set static ip for interface and from this time it stops working. I try to press programming button while interface has not bus connected. The I kept the programming button pressed and connected bus, Then programming led starts flashing. Then I press programming button for at leas 5s and released it. Programming led just keep shine forever and nothing happen. | Answer |
| 10.09.2022 08:42 Samuel Stasiov | DALI: Can I use light sensor LF/U2.1 for DG/S2.64.5.1 in order to achieve constant lighting control of DALI lights? | Answer |
| 14.09.2022 05:25 syafiqah | i-bus KNX: Do we need an Internet connection for ibusTool_ABB_1.9.47.0 installation? | Answer |
| 19.10.2022 19:29 Borys POLITOWIEZ | DALI: How many DALI Gateways DG/S x.64.x.1 can be attached to a KNX line? For instance if I have 400 LED drivers to control, can I install and control quantity 4 DG/S 2.64.1.1 on the same KNX line? Thanks | Answer |
| 13.01.2023 06:55 abhay pandey | Lighting Control: why the programming is not getting uploaded in my knx devices-showing error- individual address already in use by another device. | Answer |
| 25.02.2023 22:58 Phineas | Commissioning and Configuration: How can the System page of a SMARTtouch 6136/100C be accessed if there is no hyperlink to it? Alternatively, can said device be reset without accessing sthe System page? | Answer |
| 28.03.2023 17:23 Martin | Lighting Control: Hi, I am using the UD/S6.210.2.1 dimmer actuators to control our lighting. In some cases, when the dimmer channel is switched off, I still appear to be getting voltage (~70V AC) across the load supply and neutral terminals and a very dim glow on the light bulb. I would expect that the voltage should fall away ~0V when the channel is off. I have read through the documentation for the unit but nothing obvious expalins what I am seeing. Any help to understand this would be greatly appreciated. Regards, Martin. | Answer |
| 19.05.2023 17:35 DARKO VRANESIC | System, Infrastructure and Interfacing: How do we connect second power supply to a free@home system - in parallel to the first PS-M-64.1.1 or different way? Can they be mounted next to each other or is it better to place the seconf power supply elsewhere? | Answer |
| 25.12.2023 17:36 ">ss | Commissioning and Configuration: ">ss | Answer |
| 30.12.2023 15:30 Jan | Heating, Ventilation and Air Conditioning: Why DCA in AC/S 1.2.1 doesn't start? After partial parametrisation I tried to finish it but DCA did not start. | Answer |
| 08.02.2024 20:11 Abraham Barcaza | Energy Management: I´ve an EQMATIC QA/S 4.16.1 Modbus conected to two A43 512-100, my question is that can i donwload a tariff report?. At the webserver page in analisys menu i can acces to reports menu but only a few reports are available, Cost, Energy, Gen y Co2, neither reffr to a parameter of the devices. | Answer |
| 14.05.2024 19:45 LAZAROS | Commissioning and Configuration: I am using ETS 6.2.2 (build 7302), Master Data v33, Interface v68, Plug Info v1, Online Catalog 14/5/2024 and ABB AC/S configuration App 1.0.17 with an AC/S1.1.1. DCA window is completely empty from the first installation and I cannot go on with anything. Please advise or the article is useless. | Answer |