ABB Home and Building Automation - powered by phpMyFAQ 2.9.9

Tagged entries

Add Search Word

Page 1 out of 2 Pages

How to separate double DALI addresses with the DALI Gateways DG/S x.64.1.1?
(10400 views)
At the DALI gateways DG/S 1.1, DG/S 1.16.1 and DG/S x.64.1.1 the yellow DALI LED flashes permanently. What is the reason for this?
(9258 views)
DG/S x.64.1.1: Why does the i-bus tool show a conflict on page "General"?
(9930 views)
What to do if the manual operation button on my DG/S is x.64.1.1 does not work?
(5246 views)
What should be considered when replacing the DALI gateways, for example the new DG/S x.64.1.1, and how do you do it?
(3669 views)
How can I set my ballast or DALI group to “color temperature control” in the DG/S x.64.5.1, and what do I need to keep in mind when doing this?
(4265 views)
Can I change the color temperature as well using a 1-byte scene recall with the DG/S x.64.5.1?
(2196 views)
Can I change the color temperature using a 1-bit telegram with the DG/S x.64.5.1?
(2598 views)
Can I use the DG/S x.64.5.1 to deactivate ballasts when the lamps are all switched off for an extended time?
(2477 views)
DG/S x.64.5.1: What color temperature value is set when the “HCL function” is activated via the corresponding group object?
(2506 views)

[ next ]