How to set the IP parameters of the ABA/S 1.2.1?

Carolina Bachenheimer-Schaefer
21.11.2016 15:55

Both at ETS4 and at ETS5 the IP parameters has to be set in the properties of the Logic Controller under -> „IP“

By default, DHCP (obtain IP adress automatically) is set.

It is also possible to Use a static IP adress, if no DHCP server is available. This adress has to match the network topology.



Tags: KNX, TP
Average rating: 0 (0 Votes)

You cannot comment on this entry