Can IP Router IPR/S 2.1 and IPR/S 3.1.1 be operated in an IGMPv3 network environment?

Carolina Bachenheimer-Schaefer
08.03.2018 08:41

It isn´t possible to use the IPR/S 2.1 in an IGMPv3 network because the router doesn´t support the protocol version 3.

Additionally KNXnet/IP doesn´t guarantee permanent data traffic which results in exceeding timeouts. This affects IGMPv1 and IGMPv2.

The IPR/S 3.1.1 only supports IGMPv3. Timeouts aren´t relevant in IGMPv3 because the switch polls.

Further information about IGMP: https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol 

Tags: Interface, IP
Average rating: 0 (0 Votes)

You cannot comment on this entry