ABB Home and Building Automation - System, Infrastructure and Interfacing

Questions in System, Infrastructure and Interfacing

FAQs
Subcategories

Page 1 out of 2 Pages

MG/S 11.100.1.1: Can several device templates be inserted at the same time via the Device Configuration App (DCA)?
(35280 views)
How many devices (servers) can be connected to the MG/S 11.100.1.1?
(35150 views)
MG/S 11.100.1.1: Is it possible to assign duplicate server addresses?
(35303 views)
MG/S 11.100.1.1: What happens if the maximum number of 100 data points (signals) is exceeded?
(35384 views)
MG/S 11.100.1.1: Can the Modbus/KNX Gateway be used together with a QA/S 4.xx.1 in the same Modbus RTU system?
(32617 views)
MG/S 11.100.1.1: What type of data transmission does the gateway support?
(4776 views)
What is the maximum power available per port on the IP switch ISP/S 8.1.1.1?
(4955 views)
What applications are the IP switches suitable for?
(5321 views)
What type and class of Power over Ethernet does the IP switch ISP/S 8.1.1.1 support?
(5105 views)
What does the "NC" on the terminal block of the IP switches I S/S 8.1.1 and ISP/S 8.1.1.1 mean?
(5709 views)

1
2
→
⇥

one category up

System, Infrastructure and Interfacing (17 FAQs )
- IP-Router and Interfaces (40 FAQs )