ABB Home and Building Automation - Automation, Logic and Time Control

Questions in Automation, Logic and Time Control

FAQs

Logic and Application Controllers, Time Switches

Page 1 out of 2 Pages

ABA/S 1.2.1: What should be considered when using “constants” in combination with the “1-MUX” function?
(111 views)
How to create a function block with the logic controller ABA/S 1.1?
(6614 views)
ABA/S 1.2.1: What does „PoE Class 2“ mean?
(70052 views)
Although the network is connected to the ABA/S 1.2.1 the download runs over KNX-USB and thus very slow. What can be the reason for that?
(5889 views)
What is the function of the „RESET-Button“ under the ABA/S 1.2.1 tag holder?
(6557 views)
ABA/S 1.2.1: Why are Markers helpful and what should be considered?
(5540 views)
What happens with a time function when supply voltage (24V) of the ABA/S 1.2.1 gets disconnected?
(5616 views)
ABA/S 1.2.1: Why is the initial value not sent after a restart (download, bus voltage- and supply voltage recovery)?
(5485 views)
How to set the IP parameters of the ABA/S 1.2.1?
(6090 views)
How long does it take to download the application of the ABA/S 1.2.1 via KNX/USB and would you recommend it?
(5633 views)

1
2
→
⇥

one category up

Logic and Application Controllers, Time Switches