How can I configure a call button for a multi-family house elevator when using free@home and Welcome?
There are some possible solution to configure a call button for the elevator when having installed Welcome together with the free@home system in a multi-family house. For this it may be necessary to integrate a respective call button in the free@home control panel. If this condition is met, the user will be able to call/enable the elevator after having rang the doorbell. Therefore, the control of the elevator system requires an own push-button input.
Below an step-by-step guide providing one possible solution for the presented case.
It is recommended to check the viability of the presented solution in each project.
Call button for multi-family house elevator with free@home and Welcome
Tags: free@home, Interface