Can IP Router IPR/S 2.1 be operated in an IGMPv3 network environment?

Carolina Bachenheimer-Schaefer
06.10.2016 10:12

No. In an IGMPv3 network environment, the switch or router expects a cyclical signal from the IP Router. If no retriggered signal comes from the IPR/S, then the ports will be closed. These are safety-relevant aspects stored in the IP switch.
Solution: Either the network environment must be reset to IGMPv2, or the administrator must set the affected ports separately.
IP Router IPR/S 3.1.1 can be integrated into the IGMPv3 network environment without any problems.

Further information about IGMP: https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol 

Tags: IP, KNX, System
Average rating: 0 (0 Votes)

You cannot comment on this entry