Why should you send the wind alarm from the Weather Station cyclically?

Carolina Bachenheimer-Schaefer
07.10.2016 13:43

The wind alarm should be sent cyclically, because this allows you to ensure a type of wire break monitoring of the sensor. A monitoring function for reception of the wind alarm or safety command should also be activated in the Blind Actuator itself. Only this combination ensures consistent protection for a shading system.
The ratio of monitoring in the actuator should be set to 3 times the time of the cyclical alarm. This does not impair the actual alarm function. If a wind alarm is detected, then this is sent immediately to the actuator.

Tags: KNX, Shutter Control
Average rating: 0 (0 Votes)

You cannot comment on this entry