The KNX Security Panel GM/A sends extensive status messages (1-bit) on the KNX. Are text messages (14-byte) also sent?
In total, 551 group objects are available. The following text messages are sent on the KNX: - plain-text message (e.g. intrusion, personal attack) and name of the detector that led to an alarm - triggered detectors in every area with the names of the detectors - system state in every area (e.g. ready to set, externally set). It is possible to “page” through the text messages with a 1-bit “Up/Down” command.
Tags: KNX, Security